Lego EV3 Bricks
Set EV3 Motor (A / B / C / D / B+C) to (100)% speed
Activates the selected motor(s) and spins the motor(s) with the entered speed until a stop-command is issued to the motor(s).
It is possible to select each output-port separately or use the two output-ports B and C at the same time.
The direction the motor(s) will spin is controlled by positive/negative values of the entered speed.
Stop EV3 Motor (A / B / C / D / B+C / All)
Stops the movement of the selected motor(s).
It is possible to select each output-port separately or use the two output-ports B and C or all output-ports at the same time.
Turn EV3 Motor (A / B / C / D / B+C) by (180)°
Activates the selected motor(s) and stops the motor(s) again after it spun for the entered angle.
It is possible to select each output-port separately or use the two output-ports B and C at the same time.
The direction the motor(s) will spin is controlled by positive/negative values of the entered angle.
Set color setting of the EV3 Brick LED
Changes the color of the LEDs of the EV3 Brick. You can chose between the colors green, red and orange.
For all three colors the options on, flashing or pulse are available. It is also possible to turn off the LEDs.
Play EV3 tone for (1.0)seconds with a frequency of (2) x 100Hz with (100)% Volume setting
Plays a tone on the EV3 brick for the entered duration in the entered frequency.
The EV3 brick supports frequencies between 200Hz and 10000Hz. The volume of the sound can be entered in percent.